Designed for use with 9”(10 OZ) standard tubes JM1186PA: Made of reinforced Nylon(PA) Thrust ratio: 10:1 Thrust pressure: 198 lbs Hex rod Integrated spout cutter “Stop Drip” Feature Seal punch helps clean hardened or excess caulk from the cartridge tip Ladder hook allows for easy hanging
In order to improve the anisotropic properties of natural wood as much as possible, the properties of plywood are uniform and the shape is stable. In general, plywood should follow two basic principles in structure: one is symmetry; the other is that the fibers of adjacent veneers are perpendicular to each other.
Laser cutting machine is a process revolution of sheet metal processing. It is a "processing center" in sheet metal processing. Laser cutting machine has a high degree of flexibility, high cutting speed, high production efficiency, short production cycle, and has won a wide range of customers. In the market, the technology has a long life span. Most of the foreign plates with a thickness of more than 2 mm use laser cutting machines. Many foreign experts agree that the next 30-40 years will be a golden period for the development of laser processing technology.
1) Excellent beam quality: smaller focusing spot, finer cutting lines, higher work efficiency, and better processing quality; 2) Extremely high cutting speed: 2 times that of the same power CO2 laser cutting machine; 3) Extremely high stability: Adopting the world's top imported fiber laser, the performance is stable. 4) High electro-optical conversion efficiency, energy saving and environmental protection; 5) Extremely low use cost: The overall power consumption is lower than that of co2, which saves production costs 6) Extremely low maintenance cost: No laser working gas; Optical fiber transmission without reflectors; Large savings in maintenance costs;
The inner tube is loaded into the steel tube and placed in the center of the upper mold. The inner tube expands to hold the inner wall of the steel tube. Then, the steel tube is prevented from abnormal deformation during the tortuous process
Designed for use with 9''(10 oz) standard size tubes 6:1 thrust ratio Steel construction to help ensure strength “Stop Drip” feature Ratchet rod helps deliver smooth with ladder hook for easy dispensing Spout cutter can easily cut caulking tube tips Seal punch helps clean hardened or excess caulk from the cartridge tip Finger guard and nylon wrist strap for safety Chrome plating finish
Laser cutting equipment can be used to cut stainless steel below 4mm. Adding oxygen in the laser beam can cut 20mm thick carbon steel, but after oxygen cutting will form a thin oxide film on the cutting surface. The maximum thickness of the cut can be increased to 20mm, but the size of the cutting part is larger.
The fiber-optic laser has high electro-optical conversion efficiency and conversion efficiency of more than 30%. The low-power fiber laser does not require a chiller and uses air cooling, which can significantly save power consumption during operation, save operating costs, and achieve maximum production. effectiveness;
Designed for use with 600ml standard size tubes 11:1 thrust ratio Aluminum body and aluminum alloy handle and steel trigger for strength Smooth rod for easy dispensing Sausage type for quick cartridge loading and removal An ergonomic trigger grip for added comfort during use Seal puncture tool
Extremely high electro-optic conversion efficiency: Optical fiber laser cutting machine photoelectric conversion efficiency of about 30%, is 3 times higher than CO2 laser cutting machine, energy saving and environmental protection;